Tefsil 3 metal detectable tape features a PTFE/glass backing with
Aluminium foil and a pressure sensitive silicone adhesive cover
with yellow protective liner. The PTFE/glass is ideal for non-stick
surface applications on heat sealing machines, form seal
equipment & blister packaging. Other release applications could
be chutes, dead plates or conveyor rails. The Aluminium foil is
perfect for being identified by metal detector equipment should
the tape become worn or fall from its work surface. A silicone
adhesive backing applied to the Aluminium foil allows for reliable
bonding to the work area
Tefsil 6 metal detectable tape features a PTFE/glass backing with
Aluminium foil and a pressure sensitive silicone adhesive cover
with yellow protective liner. The PTFE/glass is ideal for non-stick
surface applications on heat sealing machines, form seal
equipment & blister packaging. Other release applications could
be chutes, dead plates or conveyor rails. The Aluminium foil is
perfect for being identified by metal detector equipment should
the tape become worn or fall from its work surface. A silicone
adhesive backing applied to the Aluminium foil allows for reliable
bonding to the work area
Tefsil 3 metal detectable tape features a PTFE/glass backing with
Aluminium foil and a pressure sensitive silicone adhesive cover
with yellow protective liner. The PTFE/glass is ideal for non-stick
surface applications on heat sealing machines, form seal
equipment & blister packaging. Other release applications could
be chutes, dead plates or conveyor rails. The Aluminium foil is
perfect for being identified by metal detector equipment should
the tape become worn or fall from its work surface. A silicone
adhesive backing applied to the Aluminium foil allows for reliable
bonding to the work area
KG-155-NA is a 4mm square aperture PTFE coated mesh. Manufactured using aramid yarn in its warp and fibreglass yarn in its weft. This material offers excellent resistance to high temperatures and is widely used for drying fabrics in a in a Relax dryer where light moisture is present. This heavier duty mesh is suited to conveyor belt applications where a strong belt is required.
KM-90-NA is a 4mm square aperture PTFE coated open aramid mesh. As a conveyor belt it provides excellent durability in the most challenging drying applications. Unaffected by steam, it is very effective in high temperature food manufacturing processes
GM2-95-NA is a 4mm square aperture PTFE coated mesh. Manufactured using a double weft yarn it provides considerably higher stability than our single weft products. This material offers excellent resistance to high temperatures and is widely used in more challenging manufacturing environments. Ideal for conveyor belt applications such as drying textiles and curing beverage cans. This our most popular PTFE mesh product.
GM-95-NA is a 4mm square aperture PTFE coated mesh. Ideal for use as a finished conveyor belt when used for drying and curing inks on screen printed products such as point of display and t-shirts. We can manufacture any belt size up to 5200mm wide and to your required length. 4000mm wide is our general stock width
GM-95-AS is a 4mm square aperture PTFE coated mesh. This black product has a carbon loading in the PTFE giving it anti-static properties. It's suited for use as a finished conveyor belt when used for drying and curing inks on screen printed products such as point of display and t-shirts
GM-82-NA is a 2mm square aperture PTFE coated mesh. This is suited for use as a finished conveyor belt when used for drying amd conveying smaller products such as cereal where more airflow is required. We can manufacture any belt size up to 5000mm wide and to your required length
GM-72-NA is a 1mm square aperture PTFE coated mesh. This product is suited for use as a finished conveyor belt when used for drying and conveying smaller products such as cereal. We can manufacture any belt size up to 5000mm wide and to your required length
GM-155-NA is a 5mm square aperture PTFE coated mesh. This is suited for use as a finished conveyor belt when used for drying and curing inks on screen printed products such as point of display and t-shirts. The material is suited to applications where slightly more airflow is required
Tefsil 10 0.25mm is our premium grade PTFE coated glass cloth with a thicker PTFE coating. We generally only supply this grade of material in 30 meter log rolls. Please contact our technical sales team if you require a shorter length as we do sometimes have partial rolls in stock.
Ideally suited as a release cloth for films on packaging machines as well as UPVC window frame welders.
Tefsil 6 0.15mm Premium PTFE coated glass cloth. Ideally suited as a release cloth for films on packaging machines as well as UPVC window frame welders. Supplied in slit roll form ranging from 10mm to 1000mm wide and on 30 meter coils. We also supply this material by the square, linear meter.
Tefsil 5 0.11mm PTFE coated glass cloth. Ideally suited as a release cloth for films on packaging machines as well as release sheets. Supplied in slit roll form ranging from 10mm to 1000mm wide and on 30 meter coils. We also supply this material by the square, linear meter.
Tefsil3 is a thin PTFE coated glass cloth. The material is ideally suited as a release cloth for films on packaging machines. It is supplied in slit roll form from 10mm to 1500mm wide and on 30 meter coils. We also sell these products by the square meter
We manufacture aftermarket Wrapmatic style PTFE heat sealing belts using a premium grade, tear resistant PTFE coated glass cloth. 4.5mm diametre tracking studs are inserted down one edge and supplied endless. LH = Left Hand / RH = Right Hand
We manufacture aftermarket Hayssen style PTFE heat sealing belts using a premium grade, tear resistant PTFE coated glass cloth. 4.5mm diametre tracking studs are inserted down one edge and supplied endless.
We manufacture aftermarket cassoli style PTFE heat sealing belts using a premium grade, tear resistant PTFE coated glass cloth. 4.5mm diametre tracking studs are inserted down one edge and supplied endless. LH = Left Hand / RH = Right Hand
Tefsil 14 Adhesive is one of our thicker products in the range. This product can be used on heat sealing equipment and is usually used in conjunction with Tefsil 5 adhesive or Tefsil 6 Adhesive.
This grade, like the other Tefsil tapes, comes with a heat resistant silicone adhesive that has a continuous service temperature of 260°C and can be put through a thermos setting cycle. This cycle is generally 4 hours long and requires the adhesive to be heated to 200°C.
The tape has a crinkled yellow release liner for ease of removing which also ensures the adhesive is well protected prior to use.
If the width you require hasn’t appeared in our drop down, please give us a call in 0044 (0) 1422 366386 with your size and we will custom slit it for you.
Tefsil 10 Adhesive is one of our thicker products in the range. This product can be used on heat sealing equipment and is usually used in conjunction with Tefsil 5 adhesive or Tefsil 6 Adhesive.
This grade, like the other Tefsil tapes, comes with a heat resistant silicone adhesive that has a continuous service temperature of 260°C and can be put through a thermos setting cycle. This cycle is generally 4 hours long and requires the adhesive to be heated to 200°C.
The tape has a crinkled yellow release liner for ease of removing which also ensures the adhesive is well protected prior to use.
If the width you require hasn’t appeared in our drop down, please give us a call in 0044 (0) 1422 366386 with your size and we will custom slit it for you.
Tefsil 6 Adhesive is based on our Tefsil 5 Adhesive product in that they share the same base fiberglass. This glass type is typically a singles 2116 style.
Tefsil 6 is a premium coated product and has a target coated weight of 300g/m2 which is well above what we generally see in the market so is worth noting when comparing products.
This style of tape is referred to by many as Teflon ® tape. We slit our tapes to any width so if you cannot see your size please call us on 0044(0) 1433 366386 and we will slit it for you.
Tefsil 5 Adhesive is a PTFE coated glass cloth tape (also known as Teflon ® tape) with a silicone adhesive applied to one surface of the materials that is heat resistant. The maximum working temperature of the adhesive is 260°C. It can be thermoset at by heating to 200°C for a 4 hour cycle.
Tefsil 5 Adhesive is our most popular PTFE coated glass cloth tape as it offer a long longer life than Tefsil 3 Adhesive but is at a cost that offer great value. Our “5thou” product has 250g/m2 of material too so please be sure to compare this to your current supplier as this is usually only 230g/m2.
Call us today on 0044 (0) 1422 366386 if you cannot see your width and we will slit it for you.
Also known as Teflon ® tape, Tefsil 3 Adhesive is a PTFE coated glass cloth tape with a heat resistant silicone adhesive applied to one surface. The adhesive will operate up to 260°C and can be thermoset at 200°C for 4 hours.
Tefsil 3 Adhesive is a very popular tape with OEM’s as it offers an affordable but effective release media for heat sealers, L-Sealers and flow wrappers.
If you cannot see the width you require please give us a call on 0044 (0) 1422 366386 as we slit to any width from 10mm up to 1000mm wide.
An easy to use, reliable and ergonomically friendly solution for welding the seams of PTFE & silicone coated materials specifically used as architectural tensile structures. A temperature range of up to 500°C allows the vulcanising of both silicone and PTFE coated materials. Being both light weight and manoeuvrable, the low profile rigid frame design allows easy loading of materials through the press.
Our PTFE (Teflon) belt edge welding press is designed for PTFE belt manufacturers and products, it creates a flat and true weld to reinforce edges of PTFE conveyor belts. Using Festo pneumatic cylinders and powerful heating elements for efficiency, its lower beam can be swung out to allow for belts to be slid on and off the platens. Both joints and edges can be sealed due to the offset platen design, it can bond / weld most types of PTFE (Teflon) coated fabrics and materials. The operation start is offered by foot pedal or dual button for safety.
We manufacture two sizes of PTFE (Teflon) coated fabric hand welders. The shorter unit is ideal for making small joints on PTFE belts in situ on a machine or welding patches to belts that have been running on machines and are in need of a quick repair. The larger welding iron is generally used for manufacturing and patching PTFE coated architectural membrane structures.
Ideal for Bonding and welding small patches to conveyor belts that are in need of a quick repair whilst on the machine. There is no control unit, the temperature is automatically reached and the iron can then be safely left on all day. The handle is made from wood as standard, if required we can supply the iron with a white Nylon handle for use in a controlled food production environment.
Are you fed up having to prise off that stuck on burnt food at the bottom of your oven or Aga? Then look no further than our heavy duty non-stick liner. Our over liner is made using a super duty PTFE coated fiberglass. This is thicker than the liner offered by Lakeland and Aldi. The benefit to this is that the oven liner will last longer giving you value for money. The great feature about our liner is that it will catch any spills or splashes from boiled over food and can easily be wiped cleaned with soapy water. Please ensure the liner in your oven is cool before doing this! The non-stick liner will operate at a constant temperature of 260 degree C which is higher than the maximum temperature of most domestic ovens. Because we have vast stocks of this material we can cut this to any size you require so please call us if your size is not listed below.
Are you fed up having to prise off that stuck on burnt food at the bottom of your oven or Aga? Then look no further than our heavy duty non-stick liner. Our over liner is made using a super duty PTFE coated fiberglass. This is thicker than the liner offered by Lakeland and Aldi. The benefit to this is that the oven liner will last longer giving you value for money. The great feature about our liner is that it will catch any spills or splashes from boiled over food and can easily be wiped cleaned with soapy water. Please ensure the liner in your oven is cool before doing this! The non-stick liner will operate at a constant temperature of 260 degree C which is higher than the maximum temperature of most domestic ovens. Because we have vast stocks of this material we can cut this to any size you require so please call us if your size is not listed below.
Techbelt ® offer various sizes of Teflon® heat press sheets to suit your individual heat press application. This non-stick heat resistant sheet has a high level PTFE coating that allows easy cleaning and repeated use time and time again
We manufacture a wide range of tunnel dryer replacement belts. These aftermarket belts will fit Trumax dryers and are made from carbon impregnated PTFE. The main structure of the belt is an open mesh fiberglass. The PTFE coating prevents product build up from sticking to it's surface for easy cleaning. Please check the size before ordering. Please note the lead time is 7 working days for us to manufacture. Please call if required sooner.
We manufacture a wide range of tunnel dryer replacement belts. This belt will suit a Panther mini dryer and is made from carbon impregnated PTFE. The main structure of the belt is an open mesh fiberglass. The PTFE coating prevents product build up from sticking to it's surface for easy cleaning. Please check the size before ordering. Please note the lead time is 7 working days for us to manufacture. Please call if required sooner.
Remarkable non-stick baking sheets that simply will not let food stick. Our baking sheet material is great for baking scones, cookies, biscuits as well as being used for the rolling out of pastry. Supplied in packs of 4
Remarkable non-stick baking sheets that simply will not let food stick. Our baking sheet material is great for baking scones, cookies, biscuits as well as being used for the rolling out of pastry. Supplied in packs of 4
Techbelt is a supplier of seamless fusing and laminator machine belts that can be woven and coated up to 3200mm in width and 13mtr in circumference. Our products are aftermarket products and not Genuine OEM parts. The belts that we supply are made to suit specific machine sizes in the market. Our use of the name Hashima is only to advise that the belts we make will fit this particular brand of machine and in no way are we advertising our belts are OEM parts. The materials we use are of the highest quality and are high performance grades. The belts are black in colour which is achieved by adding a special additive to the PTFE (also known as Teflon) liquid prior to coating on the glass fibre. The glass fibre forms the main structure of the belt and this is the part that is woven as a tube to create a belt that has no seam. The seamless belt ensures there will be no mark off on to delicate products when being heat laminated.
If you are looking to replace your existing PTFE open mesh dryer belt on your Schott & Meissner machine then Techbelt can manufacture one to suit your requirements. We are a producer of aftermarket dryer belts that are designed and hand made at our UK facility which we can then ship worldwide. Our products are not genuine OEM parts however our years of experience allows us to design and make a belt that is perfectly suited to offer a durable life at a very competitive price. OEM parts are made by companies similar to Techbelt which means you can buy direct from a dryer belt manufacturer and make a huge saving
If you have a Natgraph Airforce dryer or any other infrared or UV unit then Techbelt can manufacture a PTFE open mesh belt to suit your machine. We manufacture aftermarket belts in house at our UK manufacturing plant to suit any dryer on the market today. Here you will find a few example sizes of the belts that will fit a Natgraph Airforce dryer however if you do not see your size please give us a call with your measurements so we can quote. Please note that our parts are not Genuine OEM and the use of any machine brand name is to inform you of the machine type our belts can be made to fit.
Non-woven materials are often produced in a double belt hot oven system. These systems such, as the ones Fleissner manufacture, use two PTFE mesh belts top and bottom to sandwich polyester fibres together. The fibres are then subject to heat then cooling to thermoform as required. Techbelt manufactures aftermarket PTFE open mesh dryer belts to fit any Fleissner oven on the market today. Please note that our products are not genuine OEM parts however they are made using the highest quality materials on the market in our facility in the UK. If you don’t see your size please contact us with your requirement for a price
Techbelt manufacturers PTFE dryer mesh belts and mats for all types of ovens and dryers that cover many industry sectors. We specialise in manufacturing open mesh dryer mats for IBO’s (internal bake ovens) here at our facility in Halifax, UK and ship globally. We can manufacture you an aftermarket dryer mat to suit your Greenbank oven. Please note our products are not genuine OEM parts but are made to suit and fit a Greenbank IBO or dyer unit. We construct these to the same construction as the OEM supplies with the addition of our cross flex joining system which we feel is an improvement as fitting times are vastly reduced
Techbelt manufactures a wide range relax dryer belts. They can be made to suit all dryer types including, Dilmenler, Ruckh, Santex, plus many more. The main structure of the belt is an open mesh fiberglass. The PTFE coating prevents product build up from sticking to it's surface for easy cleaning. Please check the size before ordering. Please note the lead time is 7 working days for us to manufacture. Please call if required sooner.
We manufacture aftermarket fusing and laminating machine belts from stock to fit any kind of Reliant laminator or fusing machine. Our products are not genuine OEM parts and are aftermarket products. They are made here in our UK based facility to order and are made from high quality premium grade fabrics. PTFE coated glass cloth forms the carcus of the belt with an anti-static PTFE coating on the working surface. We can manufacture any size of fusing or laminator belt to suit any machine on the market. The PTFE coating will work at temperatures up to 260⁰C