PTFE heat sealing belts are manufactured by laminating two plies of PTFE coated glass cloth. The two layers provide an even thickness joint for maximum heat transfer.

Typical examples of machine brands our aftermarket PTFE conveyor belts are compatible with are: Berief, Dubra Grills, Formcook® Combi Cooker, Stein Progrill. Techbelt manufactures high quality PTFE coated cast film laminate belts that are compatible with your Berief contact grilling machine. Our products are not genuine OEM parts and are aftermarket products. As we are the belt manufacturer we understand the exact specification and high standards required when producing a conveyor belt to fit your Berief Dubra grilling Machine.

We manufacture aftermarket contact grill belts to suit a wide range of contact grilling machines such as TEFCO. Our products are not genuine OEM parts and are aftermarket products which are hand cut to size in our factory based in the UK. The material we use is a special cast film coated product (TL-30-RB) which is a conventional dip coated product with a special cast film top layer laminated to the surface. The benefit of this is to create a barrier to prevent the fat soaking in to the surface of the belt.

Techbelt is a manufacturer of aftermarket contact grill belts to suit all kinds of contact grilling machines on the market. We can make belts to fit formcook contact cooker gilling machines. Our products are not genuine OEM parts and are aftermarket products which we hand cut to size in our belt fabrication facility based in Halifax, UK. All the materials we use have are special cast film coated products (TL-30-RB) which is a conventional dip coated fabric with a special cast film top layer laminated to the final surfaces. The added benefit of this is it creates a firm barrier that prevents fat soaking in to the carcass of the belt.

Techbelt is a manufacturer of PTFE coated conveyor belts specifically designed to be used with tortilla press machines. We can construct PTFE belts to fit your existing Lawrence tortilla press. The non-stick conveyor belts we produce for Lawrence tortilla press machines are not genuine OEM parts but are aftermarket products that are made on a must fit basis. The conveyor belts we make are made using the highest quality materials available and offer high performance and long life. All the PTFE belts we manufacture to fit Lawrence tortilla press equipment are hand cut and made in our facility in the UK. We take special care and attention to the accuracy of the cutting and the application of the indexing strips. The joint is made from enduring Aramid (often known as Kevlar) which allows the pin to easily be inserted for fast on site installation.

The material we use is a 2 ply material that offers good dimensional stability. The top surface has cast film laminated to it to create a physical grease barrier for extended life. This is the same as you would find from a OEM supplied product.

Our sealing bands are made from high performance PTFE coated materials that are specifically designed in house. The belts are made to specifically fit your Bosch heat sealing machine. Please note that the products we manufacture are not genuine OEM parts. We only reference the brand Bosch as a way to inform you the machine make our sealing bands are suited for in terms of size and specification. Our rotary sealing bands are made by taking two plies of our special bronze coloured PTFE coated glass cloth and heat bonding them to create a double layer. The twin layer band means the joint area has a uniform thickness the same as the rest of the belt. The key advantage to this is that there will be no mark off on to the product when the joint area comes in to contact with the product being sealed. Our special bronze bands have a modified PTFE coated surface that has been extensively tested and proven to offer extended life over standard Tefsil 3 2 ply brown bands. Most of the rotary sealing bands on the market today tend to be in brown (Tefsil 3) which does not have the modified surface.

Techbelt manufactures a wide range relax dryer belts. They can be made to suit all dryer types including, Dilmenler, Ruckh, Santex, plus many more. The main structure of the belt is an open mesh fiberglass. The PTFE coating prevents product build up from sticking to it's surface for easy cleaning. Please check the size before ordering. Please note the lead time is 7 working days for us to manufacture. Please call if required sooner.

Ideal for Bonding and welding small patches to conveyor belts that are in need of a quick repair whilst on the machine. There is no control unit, the temperature is automatically reached and the iron can then be safely left on all day. The handle is made from wood as standard, if required we can supply the iron with a white Nylon handle for use in a controlled food production environment.

Are you fed up having to prise off that stuck on burnt food at the bottom of your oven or Aga? Then look no further than our heavy duty non-stick liner. Our over liner is made using a super duty PTFE coated fiberglass. This is thicker than the liner offered by Lakeland and Aldi. The benefit to this is that the oven liner will last longer giving you value for money. The great feature about our liner is that it will catch any spills or splashes from boiled over food and can easily be wiped cleaned with soapy water. Please ensure the liner in your oven is cool before doing this! The non-stick liner will operate at a constant temperature of 260 degree C which is higher than the maximum temperature of most domestic ovens. Because we have vast stocks of this material we can cut this to any size you require so please call us if your size is not listed below.

We manufacture a wide range of tunnel dryer replacement belts. These aftermarket belts will fit Trumax dryers and are made from carbon impregnated PTFE. The main structure of the belt is an open mesh fiberglass. The PTFE coating prevents product build up from sticking to it's surface for easy cleaning. Please check the size before ordering. Please note the lead time is 7 working days for us to manufacture. Please call if required sooner.

Techbelt manufactures release sheets compatible with all URBAN UPVC window welding machines. All URBAN compatible sheets offered by Techbelt are made in house. This gives us full control over our process and quality.

We use a high strength Aramid (Kevlar) sewing yard to secure the folded ends, ensuring they will not come loose.

This sheet size will suit: URBAN AKS6600

Finished size: 205mm x 290mm

Please be aware that any use of trademarks and tradenames are purely to advise the types of machines our products will fit.

Worldwide Shipping Available

Tefsil 14 Adhesive is one of our thicker products in the range. This product can be used on heat sealing equipment and is usually used in conjunction with Tefsil 5 adhesive or Tefsil 6 Adhesive. This grade, like the other Tefsil tapes, comes with a heat resistant silicone adhesive that has a continuous service temperature of 260°C and can be put through a thermos setting cycle. This cycle is generally 4 hours long and requires the adhesive to be heated to 200°C. The tape has a crinkled yellow release liner for ease of removing which also ensures the adhesive is well protected prior to use. If the width you require hasn’t appeared in our drop down, please give us a call in 0044 (0) 1422 366386 with your size and we will custom slit it for you.

We manufacture aftermarket Hayssen style PTFE heat sealing belts using a premium grade, tear resistant PTFE coated glass cloth. 4.5mm diametre tracking studs are inserted down one edge and supplied endless.

We manufacture aftermarket cassoli style PTFE heat sealing belts using a premium grade, tear resistant PTFE coated glass cloth. 4.5mm diametre tracking studs are inserted down one edge and supplied endless. LH = Left Hand / RH = Right Hand

We manufacture aftermarket Wrapmatic style PTFE heat sealing belts using a premium grade, tear resistant PTFE coated glass cloth. 4.5mm diametre tracking studs are inserted down one edge and supplied endless. LH = Left Hand / RH = Right Hand

We manufacture aftermarket fusing and laminating machine belts from stock to fit any kind of Reliant laminator or fusing machine. Our products are not genuine OEM parts and are aftermarket products. They are made here in our UK based facility to order and are made from high quality premium grade fabrics. PTFE coated glass cloth forms the carcus of the belt with an anti-static PTFE coating on the working surface. We can manufacture any size of fusing or laminator belt to suit any machine on the market. The PTFE coating will work at temperatures up to 260⁰C