PTFE Coated Kevlar Mesh KM-90-NA
£28.05
SKU: 620947467058
KM-90-NA is a 4mm square aperture PTFE coated open aramid mesh. As a conveyor belt it provides excellent durability in the most challenging drying applications. Unaffected by steam, it is very effective in high temperature food manufacturing processes
| Applications |
|---|
| PTFE mesh belts are used in applications such as the drying of printed products for example; point of display stands, T-shirts, glass and mass produced paper prints. Print dryers usually opt for Ultra violet, Infra red or hot air as the heat source to dry. Other applications range from the drying of cereals, non woven’s, charcoal interlinings, carpet & carpet tiles, printed circuit boards and shrink-wrap tunnels but to name a few. Replacement natgraph dryer belts are also manufactured from our ptfe coated glass cloth mesh. |
| Features & Benefits |
|---|
| PTFE open mesh conveyor belting is light weight and cost effective therefore is easy to handle and less expensive than wire alternatives that can be difficult to replace. |
| Often supplied with a metallic clipper type fastener these style of belts can easily be removed and replaced therefore minimising downtime and saving money. |
| Material Properties | ||
|---|---|---|
| • High temperature resistant - up to 240°C | • Excellent release properties | • Exceptional chemical resistance |
| Available in widths up to 3200mm, manufactured in various thicknesses and weights If your requirements are not available to purchase online please contact our sales team on +44 (0)1422 366386 |
| Specification | |||
|---|---|---|---|
| • Reference: | KM-90-NA (4x4) | • Colours: | Brown |
| • Standard width: | 3200mm | • Tensile strength: | 5600 N/5cm |
| • Thickness: | 0.909mm | • Temperature resistance: | 240°C |
| • Weight: | 285g/m2 | ||
